Quantity: 

Suitable for 15–20 dental comprehensive treatment units. 

Equipment Use: 

This pressure workstation serves as the power source for high-speed turbine dental handpieces and low-speed pneumatic motor handpieces during dental treatment procedures, such as tooth drilling.

Operating Conditions ：

Environmental Conditions ：

1. Ambient temperature: 5°C – 40°C;
   
2. Relative humidity: ≤ 80%;
   
3. Atmospheric pressure: 86 – 106 kPa;
   
4. Ventilation rate: ≥ 0.10 m³/s;
   
   

 Power Supply Conditions :

1. Rated voltage: AC 380 V ±10%;
   
2. Frequency: 50 Hz;
   
3. Rated power: 4.8 kW;
   
4. Noise level: ≤ 82 dB;
   
5. Air tank capacity: 300 L.
   
   

Technical Specifications :

1. Oil-free piston-type V-shaped 4-cylinder air compressor unit; motor speed: ≥ 1400 r/min; motor power: 2.2 kW.
   
2. The workstation employs two parallel-connected compressor units; air production rate (at 0.5 MPa): approximately 350 L/min × 2 = 700 L/min; capable of supporting up to 20 dental chairs.
   
3. The 300 L air storage tank is equipped with a pressure vessel certification, a safety valve, and an internal nano-antibacterial coating for rust and mold prevention.
   
4. Starting pressure: 0.5 MPa; stopping pressure: 0.75 MPa; equipped with a mechanical safety valve.
   
5. Two motors start simultaneously in time-sharing mode to reduce starting current.
   
6. Intelligent control system allows each main unit to be started and stopped independently, operate in a rotating manner, and serve as mutual backups, ensuring that each unit operates for the same duration and thereby extending its service life.
   
7. One-touch emergency startup function enables the system to switch to emergency mode with a single press when the microcomputer system fails, ensuring continuous operation of the outpatient unit while awaiting maintenance or rescue services.
   
8. Remote monitoring system provides real-time monitoring of equipment status, issues early warnings regarding the remaining lifespan of equipment components or consumables, and allows users to query equipment fault codes, operating time, parameters, and more.
   
9. Integrated design with a sleek and professional appearance.
   
10. Product dimensions: 103 cm × 58 cm × 90 cm (main unit); 72 cm × 58 cm × 176 cm (air storage tank).
    
11. Weight: ≤340 kg.
    
    

Q: How many dental units can it support?
A: 15–20 dental comprehensive treatment units.

Q: What is the main purpose?
A: Power source for high-speed turbine and low-speed pneumatic dental handpieces during procedures such as tooth drilling.

Q: What are the power and environment requirements?
A: AC 380 V ±10%, 50 Hz, 4.8 kW. Ambient 5–40°C, humidity ≤ 80%, pressure 86–106 kPa, ventilation ≥ 0.10 m³/s. Noise ≤ 82 dB.

Q: What is the air supply performance?
A: Two oil-free V-shaped 4-cylinder units, motor ≥ 1400 r/min, 2.2 kW each, approx. 350 L/min per unit at 0.5 MPa, total 700 L/min, with a 300 L air tank. Start 0.5 MPa, stop 0.75 MPa.

Q: How is it controlled?
A: Intelligent control system with independent start/stop per unit, rotating backup operation, time-sharing motor start, and one-touch emergency startup.

Q: What are the tank, dimensions, and weight?
A: 300 L tank with pressure vessel certification, safety valve, and nano-antibacterial coating. Main unit 103×58×90 cm; air tank 72×58×176 cm. Weight ≤ 340 kg.