Capacity: 

Suitable for 10–15 dental comprehensive treatment units. 

Equipment Purpose: 

Used as a suction power source for aspirating saliva, blood, small particles, or other fluids during dental procedures (e.g., tooth drilling) in hospitals or dental clinics; also features a water vapor separation and automatic discharge function.

Operating Conditions：

Environmental Conditions ：

1. Ambient Temperature: 5°C – 40°C
   
2. Relative Humidity: ≤ 70%
   
3. Atmospheric Pressure: 86 – 106 kPa
   
4. Ventilation Flow Rate: ≥ 0.30 m³/s
   

Power Supply Conditions :

1. Rated Voltage: AC 220 V ±10%
   
2. Frequency: 50 Hz
   
3. Rated Power: 3.6 kW
   
   

 Technical Specifications 

1. The water-ring suction pump can instantly generate a high suction flow rate compliant with dental application standards without any waiting time; maximum vacuum: –50 kPa;
   
2. Two high-flow vacuum pumps operate in parallel; they can be started simultaneously in time-sharing mode or operate independently as backup units, providing maximum reliability for outpatient dental care.
   
3. Features an integrated modular wet suction system with an external independent water–gas separator, enabling continuous active discharge of wastewater;
   
4. The suction pump is equipped with a stainless steel pump body, stainless steel impeller, and stainless steel base, which effectively extends the pump's service life;
   
5. An intelligent microcomputer control system allows independent control of the operating status of each vacuum pump, incorporates multiple circuit protection functions, and includes an automatic delayed shutdown feature;
   
6. An external mechanical negative pressure balancing valve ensures that the negative pressure remains within the optimal range of –11 to –15 kPa, preventing damage to the patient's oral mucosa caused by excessive negative pressure;
   
7. One-touch emergency startup function: in the event of a microcomputer system failure, the device can be activated via a single button press to enter emergency mode, allowing it to continue operating while awaiting repair or rescue services;
   
8. The solenoid valve and check valve work in conjunction to ensure a stable supply of tap water;
   
9. Water intake filtration treatment protects the vacuum pump from damage during normal operation;
   
10. Equipped with a proprietary water circulation system that can reduce tap water consumption by up to 40%;
    
11. The mechanical negative pressure balancing valve provides sufficient fresh air for internal cooling and heat dissipation of the suction pump;
    
12. Water supply pressure: 200 kPa to 400 kPa;
    
13. Water consumption: as low as 2 L/min;
    
14. Noise level: ≤75 dB(A);
    
15. Dimensions (Height × Width × Length): ≤77 × 58 × 45 cm (vertical main unit) or 72 × 61 × 12 cm (external separator);
    
16. Net weight: ≤100 kg
    

Configuration List: 

Vacuum Pump – 1;

Separator – 1; 

Vacuum Tube – 1; 

Drain Pipe – 1; 

Vacuum Tube – 1