Number of dental chair units: 

Suitable for 3–4 dental chair units.

Equipment Purpose: 

Used as the power source for high-speed turbine dental handpieces and low-speed pneumatic motor handpieces during dental treatment procedures such as tooth drilling. 

Operating Conditions:

Environmental Conditions:

1. Ambient temperature: 5°C – 40°C;
   
2. Relative humidity: ≤ 70%;
   
3. Atmospheric pressure: 86 – 106 kPa;
   
4. Ventilation flow rate: ≥ 0.10 m³/s;
   
   

Power Supply Conditions: 

1. Rated voltage: AC 220 V ±10%;
   
2. Frequency: 50 Hz;
   
3. Rated power: 1.68 kW;
   
4. Noise level: ≤ 65 dB;
   

Technical Specifications: 

    1.Oil-free piston air compressor; motor speed: ≥ 1400 r/min; nominal flow rate: 120 L/min (0.7 MPa);

    2. Two compressor heads operated in parallel, equipped with a 60 L air storage tank, sufficient for powering 3–4 dental chair units (at 0.5 MPa); 

    3.The air storage tank features a nano-antibacterial coating process that effectively inhibits bacterial growth;

    4.Equipped with an adsorption drying system, achieving a dew point temperature of –5°C; 

    5.Utilizes stainless steel high-pressure hose connections for extended service life.

    6.Equipped with an intake filter that removes 99% of dust; 

    7.The air storage tank is certified under a Pressure Vessel License;

    8. External dimensions (Height × Width × Depth): ≤89 × 52 × 73 cm; 

    9. Weight: ≤50 kg. 

System Configuration List: 

Air compressor ×1; 

Mobile casters ×4; 

Connecting steel hose ×1; 

Intake noise reduction filter ×2; 

Drainage hose ×1