Number of dental integrated treatment chairs equipped: 

Suitable for use with 8 to 10 dental integrated treatment units.

Equipment Purpose:

 Designed for treating medical wastewater generated during dental treatment procedures at hospitals or dental clinics; features automatic filtration, disinfection, and discharge functions.

Operating Conditions :

Environmental Conditions :

1. Ambient Temperature: 5°C – 40°C;

2. Relative Humidity: ≤ 70%;

3. Atmospheric Pressure: 86 – 106 kPa;

4. Ventilation Flow Rate: ≥ 0.30 m³/s;

5. Power Supply Requirements

6. Rated Voltage: AC 220 V ±10%;

7. Frequency: 50 Hz;

8. Rated Power: 220 W;

Technical Specifications

    1. The WS-50 wastewater treatment unit supports two operating modes: gravity flow mode and self-priming mode; 

    2. Equipped with the renowned Rijing Water Pump, with a maximum flow rate of 1.5 m³/h; 

    3. Features an integrated modular disinfection system with an external inlet filter for convenient daily maintenance and cleaning;

    4. Utilizes an ozone reaction-based disinfection method, with an ozone concentration of up to 10 g/h; 

    5. Incorporates a built-in ozone refinement device that effectively increases ozone solubility, thereby enhancing disinfection efficiency; 

    6. Features a high-capacity 40 L wastewater reaction tank, ensuring more thorough ozone dissolution and reaction;  

    7. Includes an automatic sensing start/stop function with a built-in high-precision water level sensor;

    8. Uses thickened PVC connection fittings and antioxidant-resistant hoses; 

    9. Includes a large-diameter disinfectant feed inlet, enabling dual sterilization as required; 

   10. Equipped with a microcomputer control system offering three operating modes: automatic, manual, and cyclic; 

   11. Emergency switch for temporarily activating the water pump and ozone system; in the event of equipment failure, this emergency                   function provides users with sufficient time to await repair or rescue services. 

   12. Noise level: ≤55 dB; 

   13. External dimensions (height × width × length): ≤55 × 45 × 75 cm;

   14. Net weight: ≤55 kg; 

Configuration List:

Wastewater treatment unit – 1 unit; 

Water level sensor – 1 unit;

Filter – 1 unit; 

Suction pipe – 1 unit; 

Drainage pipe – 1 unit.

Q: How many dental chairs can it support?
A: 8–10 dental integrated treatment units.

Q: What is the main purpose?
A: Treating medical wastewater from dental treatment at hospitals or clinics, with automatic filtration, disinfection, and discharge.

Q: What are the power and environment requirements?
A: AC 220 V ±10%, 50 Hz, 220 W. Ambient 5–40°C, humidity ≤ 70%, pressure 86–106 kPa, ventilation ≥ 0.30 m³/s.

Q: What operating modes and pump does it use?
A: The WS-50 unit supports gravity flow mode and self-priming mode, equipped with a Rijing water pump with a maximum flow rate of 1.5 m³/h.

Q: How does the disinfection system work?
A: Ozone reaction-based disinfection with concentration up to 10 g/h, an ozone refinement device, a 40 L reaction tank, and a large-diameter disinfectant feed inlet for dual sterilization.

Q: What are the control, noise, size, and weight?
A: Microcomputer control with automatic, manual, and cyclic modes, plus an emergency switch. Noise ≤ 55 dB. Size ≤ 55×45×75 cm. Net weight ≤ 55 kg.