Number of dental chair units: 

Suitable for up to 4 dental chair units.

Equipment: 

Designed for treating medical wastewater generated during dental treatment procedures at hospitals or dental clinics; features automatic filtration, disinfection, and discharge functions.

Operating Conditions :

Environmental Conditions ：

1. Ambient Temperature: 5°C – 40°C;

2. Relative Humidity: ≤ 70%;

3. Atmospheric Pressure: 86 – 106 kPa;

4. Ventilation Flow Rate: ≥ 0.30 m³/s;

Power Supply Requirements

1. Rated Voltage: AC 220 V ±10%;

2. Frequency: 50 Hz;

3. Rated Power: 170 W;

Technical Specifications:

    1.The WS-30 wastewater treatment unit supports two operating modes: gravity flow mode and self-priming mode; 

    2. Equipped with the renowned Rijing Water Pump, with a maximum flow rate of 1.5 m³/h; 

    3. Features an integrated modular disinfection system with an external influent filtration unit, facilitating routine maintenance and cleaning;  

    4. Utilizes an ozone reaction-based disinfection method, achieving an ozone concentration of up to 3 g/h;

    5. Incorporates a built-in ozone refinement device that effectively increases ozone solubility, thereby enhancing disinfection efficiency; 

    6. Features a large-capacity 25 L wastewater reaction tank, ensuring more thorough ozone dissolution and reaction; 

    7. Automatic start-stop function with a built-in high-precision water level sensor; 

    8.Utilizes thickened PVC connection fittings and an antioxidant-resistant hose;

    9. Features a large-diameter disinfectant feed port, enabling dual sterilization as required; 

   10. Microcomputer control system with three operating modes: automatic, manual, and cycle;

   11. Equipped with an emergency switch for temporarily activating the water pump and ozone system; in the event of equipment malfunction, this emergency function provides users with sufficient time to await repair or assistance; 

   12. Noise level: ≤50 dB; 

   13. External dimensions (height × width × length): ≤50 × 45 × 55 cm; 

   14. Net weight: ≤40 kg; 

Configuration List:

Wastewater Treatment Unit X1, 

Water Level Sensor X1, 

Filter X1,

Suction Pipe X1, 

Drainage Pipe X1

Q: What is this equipment used for?
A: Treating medical wastewater generated during dental treatment at hospitals or dental clinics, with automatic filtration, disinfection, and discharge.

Q: How many dental chair units can it support?
A: Up to 4 dental chair units.

Q: What are the power and environment requirements?
A: AC 220 V ±10%, 50 Hz, 170 W. Ambient 5–40°C, humidity ≤ 70%, pressure 86–106 kPa, ventilation ≥ 0.30 m³/s.

Q: What operating modes and pump does it use?
A: The WS-30 unit supports gravity flow mode and self-priming mode, equipped with a Rijing water pump with a maximum flow rate of 1.5 m³/h.

Q: How does the disinfection system work?
A: Ozone reaction-based disinfection with concentration up to 3 g/h. It includes an ozone refinement device, a 25 L reaction tank, and a large-diameter disinfectant feed port for dual sterilization.

Q: What are the control, noise, size, and weight?
A: Microcomputer control with automatic, manual, and cycle modes, plus an emergency switch. Noise ≤ 50 dB. Size ≤ 50×45×55 cm. Net weight ≤ 40 kg.