Product Technical Specifications

Probe length  :≥15   20°C,40% humidity  (mm)

Angle of the probe’s working end:  60° +5   20°C,40% humidity   (mm)

Minimum effective detection depth:  14     20°C,40% humidity (mm)

Error in detection depth:  <0.3     20°C,40% humidity (mm)

Repeatability error in detection depth:  <0.3    20°C,40% humidity  (mm)

Operating temperature:5-40℃   Both low and high temperatures can affect a patient's comfort. 

a) Classification by type of electric shock protection: Class II;

b) Classification by degree of electric shock protection: includes an application part of Type B; 

c) Classification by level of protection against liquid ingress: general-purpose equipment; foot switch: IPX1; 

d) Classification by safety level when used in environments containing flammable anesthetic gases mixed with air, or flammable anesthetic gases mixed with oxygen or nitrous oxide: equipment not suitable for use under these conditions; 

e) Classification by operating mode: continuous operation; 

f) Equipment rated voltage and frequency: Safe Extra Low Voltage (SELV), DC 5 V

The system consists of a set of probe devices, a set of foot pedals, and embedded software.

Software Introduction 

Computer Hardware Requirements:

Minimum system requirements:

4 GB RAM；512 MB free disk space；one available USB 2.0 high-speed interface,；CPU clock speed> 2 GHz； monitor resolution ≥ 1280 × 960; 

Recommended system requirements: 

8 GB RAM； 512 MB free disk space； one SSD solid-state drive； one available USB 2.0 high-speed interface； CPU clock speed> 2 × 2 GHz,；monitor resolution 1920 × 1280. 

Software Requirements: Windows 10;.NET Framework 4.8 or later. 

Please obtain and install this software from the manufacturer. If the software is corrupted or unresponsive, please contact the manufacturer's customer support for assistance.

Q: What are the probe specifications?
A: Probe length ≥ 15 mm, working end angle 60° + 5, minimum effective detection depth 14 mm.

Q: What is the detection accuracy?
A: Error in detection depth < 0.3 mm; repeatability error < 0.3 mm.

Q: What are the operating temperature and power requirements?
A: Operating temperature 5–40°C. Rated voltage: Safe Extra Low Voltage (SELV), DC 5 V.

Q: What are the safety classifications?
A: Class II electric shock protection, Type B application part, general-purpose equipment with foot switch IPX1, continuous operation. Not suitable for flammable anesthetic gas environments.

Q: What is included in the system?
A: A set of probe devices, a set of foot pedals, and embedded software.

Q: What are the software and computer requirements?
A: Windows 10 with .NET Framework 4.8 or later. Minimum: 4 GB RAM, 512 MB free disk space, USB 2.0, CPU > 2 GHz, resolution ≥ 1280×960. Recommended: 8 GB RAM, SSD, CPU > 2×2 GHz, resolution 1920×1280.