Quantity: 

Suitable for 35–40 dental comprehensive treatment units. 

Equipment Use: 

This pressure workstation serves as the power source for high-speed turbine dental handpieces and low-speed pneumatic motor handpieces during dental treatment procedures, such as tooth drilling.

Operating Conditions :

Environmental Conditions :

1. Ambient temperature: 5°C – 40°C;
   
2. Relative humidity: ≤ 70%;
   
3. Atmospheric pressure: 86 – 106 kPa;
   
4. Ventilation flow rate: ≥ 0.20 m³/s.
   

 Power Supply Conditions :

1. Rated voltage: AC 380 V ±10%;
   
2. Frequency: 50 Hz;
   
3. Rated power: 9.6 kW;
   
4. Noise level: ≤ 84 dB;
   
5. Gas cylinder capacity: 600 L.
   
   

Technical Specifications : 

1. Oil-free piston-type V-shaped 4-cylinder air compressor (4 compressor heads); motor speed: ≥ 1400 rpm; motor power: 2.2 kW; nominal flow rate: ≤ 320 L/min (at 0.6 MPa). 
   
2. Four compressor heads operated in parallel; total output capacity: 1280 L/min (at 0.6 MPa); equipped with a 600 L gas storage tank, sufficient for powering 35–40 dental comprehensive treatment units.
   
3. Starting pressure: 0.5 MPa; stopping pressure: 0.75 MPa. 
   
4. The four motors start sequentially in time-sharing mode to reduce starting current.
   
5. The Siemens PLC intelligent control system, integrated with an intelligent management system, enables individual start/stop control for each motor, allows them to operate in a rotating, backup manner, ensures that each motor operates for an equal duration, and thereby extends their service life. 
   
6. One-click switch between Smart Mode and Manual Mode: In the event of a control system failure, the device can be swiftly switched to Manual Mode to ensure the workstation continues operating, allowing it to remain active while awaiting rescue without disrupting outpatient services.
   
7. The Remote Monitoring System ensures the reliable and smooth operation of the equipment.
   
8. Integrated design with a sleek and professional appearance.
   
9. Product dimensions: ≤125 cm × 78 cm × 1050 cm (Main Unit); ≤75 cm × 60 cm × 180 cm (Air Storage Tank).
   
10. Weight: ≤400 kg.
    
    

Configuration List:

Compressor unit : V-shaped 4-cylinder-Four units

PLC control system  :Intelligent control-1 set

Chassis frame  :Aluminum material  Magnesium alloy-1 set

Air storage tank:600L-1