Quantity: 

Suitable for 25–30 dental comprehensive treatment units. I

Equipment Use: 

This pressure workstation serves as the power source for high-speed turbine dental handpieces and low-speed pneumatic motor handpieces during dental treatment procedures such as tooth drilling.

Operating Conditions :

Environmental Conditions :

1. Ambient Temperature: 5°C – 40°C;
   
2. Relative Humidity: ≤ 70%;
   
3. Atmospheric Pressure: 86 – 106 kPa;
   
4. Ventilation Flow Rate: ≥ 0.20 m³/s;
   

Power Supply Conditions :

1. Rated Voltage: AC 380 V ±10%;
   
2. Frequency: 50 Hz;
   
3. Rated Power: 7.2 kW;
   
4. Noise Level: ≤ 84 dB;
   
5. Air Cylinder Capacity: 300 L.
   
   

Technical Specifications :

1. Oil-free piston-type V-shaped 4-cylinder air compressor head; motor speed: ≥ 1400 r/min; motor power: 3 kW; nominal flow rate: 350 L/min (0.6 MPa).
   
2. Two compressor heads operated in parallel, equipped with a 300 L air storage tank, sufficient for powering 25–30 dental comprehensive treatment units (at 0.5 MPa).
   
3. Starting pressure: 0.5 MPa; stopping pressure: 0.75 MPa.
   
4. The two motors start in time-sharing mode to reduce starting current.
   
5. The microcomputer, integrated with an intelligent management system, enables individual start/stop control for each motor, allows them to operate in a rotating sequence as backup units, ensures that each motor operates for the same duration, and thereby extends their service life.
   
6. Equipped with a precision filtration system that removes dust, water, and oil from the compressed air.
   
7. A remote monitoring system provides real-time monitoring of equipment operation status, issues early warnings regarding the service life of equipment consumables or spare parts, and allows users to query equipment fault codes, operating time, parameters, and other information. 
   
8. Integrated design with a sleek and professional appearance.
   
9. Product dimensions: 103 cm × 58 cm × 90 cm (main unit); 72 cm × 58 cm × 176 cm (air storage tank).
   
10. Weight: ≤300 kg.
    

Configuration List:

Compressor unit  :V-shaped 4-cylinder-Two units

Chassis frame  :Aluminum material, sheet metal-, one set

Air storage tank  :300L-1--Internal rust prevention coating

Safety valve  :1 inch-1

Pressure gauge  :-1

Filter  :4

Drain pipe:8*5-1

Q: How many dental units can it support?
A: 25–30 dental comprehensive treatment units.

Q: What is the main purpose?
A: Power source for high-speed turbine and low-speed pneumatic dental handpieces during procedures such as tooth drilling.

Q: What are the power and environment requirements?
A: AC 380 V ±10%, 50 Hz, 7.2 kW. Ambient 5–40°C, humidity ≤ 70%, pressure 86–106 kPa, ventilation ≥ 0.20 m³/s. Noise ≤ 84 dB.

Q: What is the air supply performance?
A: Two oil-free V-shaped 4-cylinder heads, motor ≥ 1400 r/min, 3 kW each, 350 L/min at 0.6 MPa, with a 300 L air tank. Start 0.5 MPa, stop 0.75 MPa.

Q: How is it controlled?
A: Microcomputer with intelligent management system, individual start/stop, rotating backup operation, and time-sharing motor start to reduce starting current.

Q: What maintenance features does it have?
A: Precision filtration system removes dust, water, and oil; remote monitoring system tracks operation status, consumable life, fault codes, and parameters.