Number of dental chair units:

Suitable for 10 dental chair units. 

Equipment Use: 

Used as the power source for high-speed turbine dental handpieces and low-speed pneumatic motor handpieces during dental treatment procedures such as tooth drilling.

Operating Conditions: 

Environmental Conditions: 

1. Ambient temperature: 5°C – 40°C;
   
2. Relative humidity: ≤ 70%;
   
3. Atmospheric pressure: 86 – 106 kPa;
   
4. Ventilation flow rate: ≥ 0.40 m³/s;
   
   

Power Supply Conditions:

1. Rated voltage: AC 380 V ±10%;
   
2. Frequency: 50 Hz;
   
3. Rated power: 2.2 kW;
   
4. Noise level: ≤ 82 dB;
   
5. Air tank capacity: 120 L.
   
   

Technical Specifications: 

1. V-type 4-cylinder air compressor – Motor speed: ≥ 1400 rpm;
   
2. Motor power: 2.2 kW;
   
3. Nominal flow rate: 320 L/min (0.6 MPa);
   

   4.The air tank is internally coated with high-temperature anti-rust coating; 

   3. Starting pressure: 0.5 MPa; Stop pressure: 0.75 MPa; 

   4. Integrated design with elegant and professional appearance; 

   5. Automatic drainage system;

   6. Product dimensions: 108 cm × 50 cm × 90 cm (main unit); 

   7. Gross weight: ≤ 134 kg.

Q: How many dental chair units can it support?
A: 10 dental chair units.

Q: What is the main purpose?
A: Power source for high-speed turbine and low-speed pneumatic dental handpieces during procedures such as tooth drilling.

Q: What are the power and environment requirements?
A: AC 380 V ±10%, 50 Hz, 2.2 kW. Ambient 5–40°C, humidity ≤ 70%, pressure 86–106 kPa, ventilation ≥ 0.40 m³/s. Noise ≤ 82 dB.

Q: What is the air supply performance?
A: V-type 4-cylinder compressor, motor ≥ 1400 rpm, 2.2 kW, 320 L/min at 0.6 MPa, with a 120 L air tank. Start 0.5 MPa, stop 0.75 MPa.

Q: What maintenance features does it have?
A: Automatic drainage system and high-temperature anti-rust coating inside the air tank.

Q: What are the dimensions and weight?
A: Main unit 108×50×90 cm. Gross weight ≤ 134 kg.