Number of dental comprehensive treatment chairs equipped: 

Suitable for use with 2 dental comprehensive treatment chairs.

Equipment Use:

When dental treatment equipment (e.g., dental drilling devices) is in use for procedures such as tooth drilling, this unit serves as the power source for both the high-speed turbine dental handpiece and the low-speed pneumatic motor handpiece. 

Operating Conditions：

Environmental Conditions ：

1. Ambient temperature: 5°C – 40°C
   
2. Relative humidity: ≤ 70%
   
3. tmospheric pressure: 86 – 106 kPa
   
4.  Ventilation rate: ≥ 0.10 m³/s
   
   

 Power Supply Conditions：

1. Rated voltage: AC 220 V ±10%
   
2. Frequency: 50 Hz
   
3. Rated power: 840 W
   
4. Noise level: ≤ 69 dB
   
5. Air tank capacity: 38 L
   
   

Technical Specifications :

1. Oil-free piston-type air compressor; motor speed: ≥ 1400 rpm; nominal flow rate: 60 L/min (at 0.7 MPa);
   
2. One compressor head, paired with a 38 L air storage tank, is sufficient for powering two dental comprehensive treatment units (at 0.5 MPa);
   
3. The air storage tank features a nano-antibacterial coating process that effectively inhibits bacterial growth;
   
4. Equipped with an adsorption drying system, enabling a dew point temperature of –5°C;
   
5. Utilizes stainless steel high-pressure pipe connections for extended service life.
   
6. Equipped with an intake air filter that captures 99% of dust;
   
7. The air storage tank is certified under a Pressure Vessel License;
   
8.  Product dimensions (length × width × height): ≤55 × 44 × 70 cm; Packaging dimensions (length × width × height): ≤59 × 46 × 83 cm;
   
9. Product weight: ≤40 kg; Packaging weight: ≤52 kg
   
   

System Configuration List: 

Air compressor ×1; 

Air intake silencer filter ×1; 

Drainage hose ×1

Q: How many dental chairs can it support?
A: 2 dental comprehensive treatment chairs.

Q: What is the main purpose?
A: Power source for high-speed turbine and low-speed pneumatic dental handpieces during procedures such as tooth drilling.

Q: What are the power and environment requirements?
A: AC 220 V ±10%, 50 Hz, 840 W. Ambient 5–40°C, humidity ≤ 70%, pressure 86–106 kPa, ventilation ≥ 0.10 m³/s. Noise ≤ 69 dB.

Q: What is the air supply performance?
A: Oil-free piston compressor, motor ≥ 1400 rpm, 60 L/min at 0.7 MPa. One head with a 38 L tank, enough for 2 dental units at 0.5 MPa.

Q: What air quality features does it have?
A: Adsorption drying system with –5°C dew point, intake filter capturing 99% of dust, and nano-antibacterial coating inside the tank.

Q: What are the dimensions and weight?
A: Product size ≤ 55×44×70 cm; packaging ≤ 59×46×83 cm. Product weight ≤ 40 kg; packaging weight ≤ 52 kg.