I. Equipment Name: Dental Electric Oil-Free Air Compressor

Equipment model: AETHER-180

Ii. Quantity: Suitable for use in chairside grinding equipment and porcelain turning machines

Iii. Equipment Application:

It is used as the power gas for the chairside repair grinding equipment and porcelain turning machine in hospitals or dental clinics

Source.

Iv. Working Conditions

4.1 Environmental Conditions

4.1.1 Ambient temperature: 5 ℃ to 40 ℃

4.1.2 Relative humidity: ≤ 70%

4.1.3 Atmospheric pressure: 86-106Kpa

4.1.4 Ventilation flow rate ≥0.20 m ³ /s

4.2 Power Supply Conditions

4.2.1 Rated voltage: AC220V±10%

4.2.2 Frequency: 50Hz

4.2.3 Rated power: 6 KW

4.2.4. Noise: ≤80dB

4.2.5 Gas tank capacity: 180L

V. Technical Parameters

▲1. Oil-free piston V-type four-cylinder air compressor, motor speed: ≥1400 r/min, nominal flow

The output is 300L/min(0.8Mpa), the maximum pressure is 1.0Mpa, and the gas production of the unit is 600L/min(0.8Mpa).

▲2. By using two compressor heads in parallel and equipped with a 180L air storage tank, it can meet the needs of 1-2 chairside grinding devices or

The use of the porcelain turning machine.

▲3. Anti-rust treatment inside the gas storage tank.

4. Two motors start at different times to reduce the starting current.

5. Each motor can be started and stopped independently.

6. Microcomputer controller, under-voltage protection, overcurrent protection.

7. It is equipped with an automatic drain valve to drain water regularly to prevent water accumulation in the tank and extend the lifespan of high and low-speed mobile phones.

8. Dimensions (length × width × height) : ≤150*63*90CM

▲ 9. Weight: ≤175 Kg

Q1: What is this AETHER-180 dental oil-free air compressor used for? 

A: This AETHER-180 oil-free compressor provides power gas for chairside grinding equipment and porcelain turning machines in dental clinics and hospitals, suitable for 1 to 2 sets of chairside restoration processing devices.

Q2: What are the working power parameters of this AETHER-180 model? 

A: It adopts AC220V±10%, 50Hz power supply with rated power of 6kW. The operating noise is ≤80dB, equipped with an 180L air storage tank for stable air supply.

Q3: What is the air output and pressure performance of this compressor?

A: It is oil-free piston V-type four-cylinder design. Nominal flow is 300L/min@0.8MPa, total gas production reaches 600L/min@0.8MPa, maximum pressure up to 1.0MPa. Two compressor heads work in parallel.

Q4: How does the motor control system work? 

A: Two motors adopt time-shared starting to reduce starting current. Each motor supports independent start and stop. The built-in microcomputer controller has under-voltage and overcurrent protection for safe operation.

Q5: Does this machine have water drainage function?

A: Yes. It is fitted with an automatic drain valve for regular drainage. It prevents water accumulation inside the tank and extends the service life of dental high and low-speed handpieces.

Q6: What are the overall dimensions and weight of AETHER-180?

A: The dimension (L×W×H) is ≤150 × 63 × 90 cm, and the weight is ≤175 Kg. Compact structure, easy installation for dental chairside workshop.