Capacity:

Suitable for use with 45–50 dental combined treatment units. 

Equipment Purpose: 

This device serves as a suction power source for extracting saliva, blood, or small particles during dental procedures (e.g., tooth drilling) in hospital or dental clinic settings; it also features a water vapor separation and automatic discharge function. 

Operating Conditions :

Environmental Conditions :

1. Ambient Temperature: 5°C – 40°C
   
2. Relative Humidity: ≤ 70%
   
3. Atmospheric Pressure: 86 – 106 kPa
   
4. Ventilation Flow Rate: ≥ 0.40 m³/s
   
5. Power Supply Requirements
   
6. Rated Voltage: AC 380 V ±10%
   
7. Frequency: 50 Hz
   
8. Rated Power: ≤ 12.5 kW
   

Technical Specifications:

1. Air-ring suction pump; Motor Speed: ≥ 2800 rpm – Capable of instantly generating a high suction flow rate compliant with dental application standards without any waiting time; Maximum vacuum: –34 kPa
   
2. High suction flow rate: When P = 0 kPa/mbar, the suction capacity of a single vacuum pump is ≥ 3840 L/min; the total suction capacity of the system is ≥ 15,360 L/min; When P = –15 kPa/mbar, the suction capacity of a single vacuum pump is ≥ 2500 L/min; the total suction capacity of the system is ≥ 10,000 L/min. Four vacuum pumps are operated in parallel to accommodate 45–50 dental unit systems;
   
3. Features an integrated modular semi-dry suction system with an independent wastewater pump for continuous active wastewater discharge; a high-efficiency stainless steel separation tank; a high-precision liquid level sensor; an internal tank flushing and cleaning system; and a UVC ultraviolet sterilization module.
   
4. The Siemens PLC, when integrated with the intelligent management system, enables independent control of the operating status of each vacuum pump; this allows each pump to be started and stopped individually and operated in a rotating sequence, ensuring that each pump operates for an equal duration and thereby extending its service life; the system features multiple circuit protection functions, including an automatic delayed shutdown function.
   
5. The remote monitoring system ensures the reliable and efficient operation of the equipment.
   
6. The built-in mechanical negative pressure balancing valve maintains the negative pressure within the optimal range of 140–180 mbar, preventing excessive negative pressure from damaging the patient's oral mucosa;
   
7. The mechanical negative pressure balancing valve ensures adequate fresh air supply for internal cooling and heat dissipation within the suction pump;
   
8. Noise level: ≤80 dB(A);
   
9. External dimensions: (Height × Width × Length) ≤134 × 78 × 114 cm (main unit) or 60 × 60 × 112 cm (separate tank);
   
10. Net weight: ≤320 kg.
    

Equipment List:

Suction Pump ×1; 

Separation Tank ×1; 

Suction Hose ×1; 

Drain Hose ×1; 

Vent Hose ×1

Q: How many dental units can it support?
A: 45–50 dental combined treatment units.

Q: What is the main purpose?
A: Extracting saliva, blood, or small particles during dental procedures; also separates water vapor and discharges automatically.

Q: What are the power and environment requirements?
A: AC 380 V ±10%, 50 Hz, ≤ 12.5 kW. Ambient 5–40°C, humidity ≤ 70%, pressure 86–106 kPa, ventilation ≥ 0.40 m³/s.

Q: What is the suction performance?
A: Motor ≥ 2800 rpm, max vacuum –34 kPa. At 0 kPa: single pump ≥ 3840 L/min, system ≥ 15,360 L/min. At –15 kPa: single pump ≥ 2500 L/min, system ≥ 10,000 L/min.

Q: How is it controlled?
A: Siemens PLC independently controls each pump, with rotating sequence operation, multiple circuit protection, delayed shutdown, and remote monitoring.

Q: What is included, and what are the noise, size, and weight?
A: Includes suction pump, separation tank, suction hose, drain hose, vent hose (each ×1). Noise ≤ 80 dB(A). Size ≤ 134×78×114 cm or 60×60×112 cm. Weight ≤ 320 kg.